Listed below is a comprehensive range of products available thought BCM Pipeline Supply Pty. Ltd. For further information relating to any or all of these products, please complete the further information page or don't hesitate to contact us.
TIX - IKS Valves service the needs of the Petroleum & Process industries
with a full range of ANSI and API-6D Class Valves, Actuators and accessories.
Products Available
IKS Unique Single Vertical Weld A-1 Pipeline Ball Valves
Satisfy ANSI 150 through 2500 and API 2000 through 5000 Standards. Made of forged steel to assure uniform fine grain structure and toughness, they maybe specified in sizes from 2" to 56".IKS Type "SLB" Slab Gate Valve
The bolted body style valve is constructed to allow field service and maintenance, if necessary. It's three-piece trunnion mounted design to ANSI Class 150 through 1500 and satisfies API 200 through 5000 standards. Made of forge steel to assure uniform fine grain structure and toughness, it may be specified in sizes from 2" to 56".IKS Type "EXP" Expanding Gate Valve
Designed to accommodate a variety of applications and preferences, the double acting and metal-to-metal seat arrangements are available both Welded body and Bolted body styles. Double Acting - conventional upstream sealing / downstream sealing. Metal-to-metal - wide metal face seat / elastomer seal.
Team Inc (SING) design and manufacture both standard and custom fittings and equipment for our customers who include all major oil and gas companies, the chemical, pulp & paper and steel industries, plus utility, water / wastewater and industrial plants.
Products / Services Available
Hot Tapping - or Pressure Tapping Line Stopping.
Close-Sure Flanged Weld-On Pressure Retention Split Tees - for line stopping & branch work on steel pipe.
Weld-On Pressure Retention Split Tees - for hot tapping connections, size on size or reducing branch for steel pipe.
Under Pressure Drilling Machines - Sub Sea and Land Machines
HTP - Special equipment and procedures for Line Stopping high temperature systems above 500°F.
Split Sleeve Repair Clamps - Specialising in the design and manufacture of a full line of Mechanical Piping Repair Clamps & Piping connection products.
Flanged End Connectors - Flange End Connections.
Pipe End Connections - Team cylindrical sleeve-type PEC's structurally attach & seal to the pipe, thus mechanically joining two pipes together.
Pin Hole Leak Clamps - Team Pin Hole Leak Clamps (PHLC's) provide effective means of sealing small holes, punctures, tears and localised thin spots in piping systems.
Offshore - Utilising Team Hot Tapping equipment with our subtec power unit, the Team has performed taps.
Valve Inserting - the installation of an AWWA Gate Valve into a pressurised water system. Sizes: 4" - 20".
Leaking Sealing - on stream leak sealing from vacuum to 6,000 PSI. Temperature from -25°F to 1700°F. Service: Air, steam, water and process.
Oilstates Hydrotech (USA) is the undisputed world leader in engineered pipeline connection and repair products & related equipment and fittings.
Products Available
Pipeline Repair Clamps - are used to enclose areas of corrosion or minor pipeline leaks and can accommodate dented or buckled pipelines.
Pipeline Flange Connectors - are suitable for a wide range of applications both Subsea and above sea level.
Pipeline Sleeve connectors - design enables connector setting to be achieved over a variable length of pipe or mandrel.
Pipeline Retrieval Tool - this is inserted into the pipeline to provide a sealed and structurally competent attachment to the pipeline to enable its recovery to the lay barge.
Pipeline Engineering (U.K.) is acknowledged as a leading player in the international pipeline pigging.
Products Available
Pipeline Pigs - Standard Cup Pigs / Bi-Directional Disc Pigs / Omni Pigs / Foam Pigs / Spheres / Omnithane®
Pig Traps And Tees - Pigs Traps / Piggable Tees / Flow Divertors
Closure And Signalers - Clamping Closures / Clamicseal Closures / Uni-Sig Pig Signalers
Pipeline Isolation Systems - Stoppers - Low / Medium / High Pressure
Hydrostatic Testers - Flange Weld Tester / Internal Joint Tester
VoTech Filter GmbH grew to be a specialised and innovative manufacturer of filtering and coalescing cartridges mainly for application in natural gas, thereby creating a reputable name in this field. The rapid expansion of the energy market and the ever increasing demands of this market presented new challenges. Their products are meant for the processing of natural gas; our endeavour is to replace the word gas with 'energy' VoTech is a proven solution finder.
Standard items as well as new products are tested in their laboratory on the "Æ" Test Facility: another unique VoTech development. With the "Æolus" test loop up to 30 metres in length, it is possible to simulate pipeline conditions in a 6" pipeline at atmospheric pressure and with gas velocities of 1 up to 22 m/s.
By means of the advanced technology of an Optical Particle Counter in combination with an aerosol generator and injection unit, the efficacy of filtering and separation devices can be analysed. The Optical Particle Counter and the aerosol unit have been further improved in order to permit application for test purposes in natural gas with line pressure up to 84 bar.
Val-Tex (USA) offers a minimum number of products for maximum number of services and types of valves. Our lube sealants can be used on the following makes of plug, ball, gate and control valves: W-K-M, Rockwell (Nordstrom), Cameron, McEvoy, Mission, Grove, OIC, Gray, Fischer, Masoneilan, TK, Demco, Walworth, Val-Tek and many others. Our Val-Tex tube sealants, lubricates and valve flush are biodegradable.
Products Available
Val-Tex 700 - A new biodegradable valve lube sealant.
Val-Tex QS-2000a Lubrication Unit - still pumpsa "J" stick in 30 seconds and can pressure up to 10,000 PSI.
Val-Tex - new API Gate Valve Lubricant
Val-Tex - Special Silicone Sealant
Val-Tex "Valve Flush" - breaks out hardened sealants and lubricants in all types of valves.
Val-Tex 1400 - Hydraulic - High Pressure Gun
Val-Tex Tube Sealant Fittings - Designed and engineered for fast, safe valve lubrication.
3-Piece Bolted Ball Valves and Single & Double Block & Bleed Ball Valves
Ball Valves from Multi-Valve Technology
o MVT offers you a complete range of Bi-Directional Ball Valves, fully field repairable, ranging from ½" to 24" and encompassing all pressure class.
o These Valves are manufactured at their two modern 1,4000 sq.m factories in France. Both factories are independently ISO 9001 Certified.
o All Valves are manufactured on 'State-of-the-art' CNC Machines.
o Emphasis has been given not just to an overall 'Robust Valve Design' but to a reliable, low friction seating arrangement, to ensure continuous bubble tight sealing and ease of operation of these valves in the field.
o Special attention has also been given to Valve standardisation and of part interchange-ability, so minimum spare parts can be held for a cross section of their Valves.
o MVT (U.K.) Trunnion Mounted Valves are all suitable for 'Double Block & Bleed' service, being fitted with a body Bleed Valve in the body cavity.
o All Valves are designed to API 6D or API 6A (where applicable) and also ANSI B16 34.
o MVT (U.K.) standard Valve is offered with materials to suit the NACE Publication MR-01-75 latest revision and again as a standard Fire-safe to BS 6755 PT2.
VALVE FEATURES & OPTIONS:
Design Types - MVT End Entry Ball Valves are offered in two basic configurations, Trunnion Mounted and Floating Ball.
Floating Ball Valves - support the Ball by the seats along allowing the ball to 'Float' between fixed seats. This is suitable only for small bore or low pressure Valves where the weight of the ball is not excessive.
Trunnion Mounted Ball Valves - are used for larger bores & pressure classes. They support the ball on a fixed vertical axis, with the seats being spring loaded. By the nature of the design Trunnion Mounted Ball Valves will lead to reduced Valve Break Torques.
The Dimensional Data included, indicates MVT (U.K.) standard practice. MVT (U.K.) are able to offer Trunnion Mounted on the majority of Valves listed as Floating Ball. Both types are of Bolted Construction.
PISTON ACTION SEATS: Spring loaded Seat Holders used on Trunnion Mounted Ball Valves ensure the seat is constantly in contact with the ball and that an effective seal is realised from Low to High Pressure. Whilst the springs guarantee the seats are kept
tightly in contact with the ball at low pressure, as the pressure rises a pressure force is applied behind the seat at seal diameter 'D'. As this diameter exceeds the contact diameter 'C', the resulting piston effect forces the seat firmly onto the ball ensuring a tight seal.
FIRE-SAFE: Valves are Certified in accordance with BS6755 PT2.
VALVE CAVITY PRESSURE RELIEF: In the event of a build up in cavity pressure the Piston Action Seats are designed such that the downstream seat will retract allowing the pressure to equalise.
In Floating Ball types Valves the pressure will equalise to the upstream side.
OPERATION: Dimensional data indicates MVT standard methods of operation. MVT can however offer Gearboxes or Actuators to suit most of their Valve sizes. All Valves have 90 degree operation with visual open / close indicator. All Mounting Flanges are supplied to ISO standard unless otherwise requested.
BLOCK & BLEED: All MVT Trunnion Mounted Ball Valves are suitable for Block & Bleed Service.
SEALS: MVT Standard range uses Elastomer O-Rings with Grafoil back up and plastic seats. If you have a specific line medium or temperature range to meet, please contact us.
OPTIONS
ANTI-EXPLOSIVE DECOMPRESSION: MVT have a wide variety of Elastomers available to suit various line mediums and temperature ranges. Many can be offered as Anti-Explosive Decompression.
BLOWDOWN: MVT Ball Valves can be simply modified to include additional PTFE Seals to make the Valve suitable for Blowdown operation.
CRYOGENIC: Valves can be supplied with additional PTFE Poly-seals, lip-seals and stem extensions to meet your requirements.
DESIGN APPROVAL: MVT offer a calculation and Design Approval service which allows you to specify verification by your choice of Certifying body, e.g. DNV or Lloyds. Otherwise calculation packages can be prepared to your requirements for internal review.
ESDV: MVT Valves can be designed specifically to meet Emergency Shutdown requirements.
HIGH TEMPERATURE: MVT can supply High Temperature Valves which included metal-to-metal seats, grafoil sealing, and stem extensions.
LIFTING LUGS: As standard, Valves weighting over 500 Kg will be supplied with Lifting Lugs. Other Valves can be fitted with lifting lugs on request.
LIPSEALS: PTFE based spring activated Lipseals can be offered to your requirements e.g. Stem only, Full Lipseal, or anything in between.
LOCKING FACILITY: All Valves can be supplied with Locking Mechanisms if specified.
METAL SEALS: MVT can offer metal C Seals at body joints if required.
METAL SEATED: Valves can be supplied metal seated. For small bore Valve solid stellite Balls are used, for larger bore Valves, Ball are welded overlaid and machined and polished to provide a perfect seat to ball contact.
NON STANDARD BORE: MVT can offer bores to suit your requirements.
PED: MVT have been active in ensuring our Valves will be in conformance with the Pipeline Equipment Directive. This has been done via continuous consultation with Lloyds.
PRODUCT STANDARDISATION: Whilst striving to build the best Valve possible, MVT do however also concentrate on interchangeability between various sizes of Valves. This helps to minimise spares stock required and is of benefit to us, the manufacturer and to you the client.
SEALANT INJECTION: Valves can be modified to include stem lubrication or seat sealant injection.
STEM EXTENSION: These can be supplied pressure, or non-pressure retaining to meet your requirements, be it Cryogenic, High Temperature or Buried Service.
SUBSEA: MVT can offer all Valves modified for Subsea Operation. Operators can be supplied to be suitable for ROV Operation.
TESTING: MVT can offer a wide variety of testing, both internally and by external bodies (if required). This could include extended gas testing, Cryogenic testing or Hyperbaric testing, for example.
TRUNNION MOUNTING: MVT can Trunnion Mount all sizes and pressure classes of Ball Valve, if required.
WELD OVERLAY: Weld overlay can be offered to meet your requirements e.g. Seat Pockets, Stem Bore, all Wetted areas etc., in a wide variety of Stainless Steels and high Nickel Alloys.
VENT / DRAIN: Vent & drain plugs are fitted as standard on larger MVT Ball Valves. MVT can however, machine your requested configuration to include safety type or Flanged type for example.
3 PIECE TRUNNION MOUNTED BALL VALVE
1. Adapter 2. Grafoil Seal 3. O-Ring 4. Seat 5. Ball 6. Body 7. Stud 8. Stem 9. Activator Ring 10. Spring 11. Nut 12. Bonnet 13. Thrust Washer 14. Seat Holder 15. Key 16. Cap-screw 17. Trunnion 18. Trunnion Flange 19. Bush 20. Mounting Flange 21. Spacer
BALL VALVE AND SINGLE & DOUBLE BLOCK AND BLEED VALVES
MVT (U.K.) introduces you to a new generation of Single and Double Block and Bleed Valves, designed, manufactured and tailored to suit the ever increasing demands of the Oil, Gas and Petrochemical Industries.
These Valves are manufactured at our modern 9,000 S.Q.M. factory in Blois, France, using the most advanced technology and equally the most modern CNC machines. Included in our group of Companies, it the Forgemaster S.M.F.O. who will supply us with all forgings in the diversity of materials we require to meet our Customer's most stringent requirements. As we are not dependant on 'Third Party' companies to complete our product range, MVT firmly believe the flexibility, workmanship and product quality they can offer, is unrivalled.
All Valves will be manufactured in a Third Party ISO 9001 environment.
MVT is not just able to offer Ball Blocks, but Gate, Globe and Needle Blocks or combinations thereof. A design is available to offer the right Valve for your required service conditions. All these options can be supplied Full Bore.
These Valves are designed for reliable service in the field, with care and attention particularly addressed to the interchangeability of parts and therefore the minimal requirement of spare parts being held by customer.
ALL VALVES MEET THE FOLLOWING REQUIREMENTS AS A STANDARD:
o Designed to ANSI B16.34, ANSI B31.3 and ASME VIII (where applicable);
o Forgings Supplied by Group Company;
o Manufactured at our French Factory to ISO 9001;
o Components machined on State of the Art CNC Machines;
o Antistatic;
o Firesafe to BS 6755 PT2 (applicable for Ball Block only);
o Full compliance to the NACE Publication MR-01-75 Latest Revision;
o Certified to DIN 50049.3.1.B as a Standard, with 3.1.C as a Customer option.
BENEFITS OF THE MVT DESIGN:
o Economical design for ease of installation into Space restricted areas;
o Reduced weight to conventional Valves;
o Ease of maintenance;
o Designed for reliability;
o Designed for versatile modification to suit a customer's requirements, i.e. Sample probe, Locking Devices and extensions for both Low and High Temperature;
o Complete range of End Configurations, i.e. RF, RTJ, NPT, BSP, BSW, SWE, Hubs or combinations thereof;
o Complete Manufacture, Testing and Painting performed In-House;
o Diverse range of materials, including the most exotic, supplied from our Sister Company S.M.F.O..
